PRODUCTS

PRODUCTS

Was established in 2010 and is a professional manufacturer of high-precision roller bearings, ball bearings, and non-standard bearings

54000U Series

Double direction thrust ball bearings consist of one shaft washer, two housing washers and two ball and cage thrust assemblies.

54000U Series

Thrust Cylindrical Roller Type 80000/80000

Cylindrical roller thrust bearings can be split into thrust cylindrical roller and cage assemblies, shaft washers and races. Such bearings can withstand large axial loads in one direction, but cannot withstand radial loads, and they do not have self-aligning capabilities.

Thrust Cylindrical Roller Type 80000/80000

Thrust Spherical Roller Type 29000/29000

Spherical roller thrust bearings have specially designed raceways and asymmetrical rollers.

Thrust Spherical Roller Type 29000/29000

Thrust Needle Roller And Cage Assembly Type AXK/AXK

Needle roller thrust bearings are fitted with a form-stable cage to reliably retain and guide a large number of needle rollers.

Thrust Needle Roller And Cage Assembly Type AXK/AXK

RNA, NK Type_RNA, NK

RNA, NK type needle roller bearings, this type of bearing has no inner ring, it is suitable for the support structure with limited radial installation size, and the journal matched with the bearing is directly used as the rolling surface.

RNA, NK Type_RNA, NK

NA, NKI Type_NA, NKI

There is an inner ring NA.NK type needle roller bearing. Since the inner ring has no rib, the inner ring, outer ring, a full set of needle rollers and cages can be installed separately, and the axial displacement of the shaft or housing is not restricted.

NA, NKI Type_NA, NKI

F Series

Drawn Cup Needle Roller Bearings are similar to standard roller bearings except for their much smaller diameter-to-length ratio.

F Series

CF Series

Cam Follower - CF Series, this model is an economical Cam Follow having a driver groove or hexagon socket in the stud head.

CF Series

7000AC Series

Angular contact bearing balls (type 70000 AC) with α=25°, are inseparable and can only bear the axial force of one side, and the shoulder heights on both sides of the inner and outer rings are different, so more steel balls can be loaded to improve the bearing capacity.

7000AC Series

70000C Series

Angular contact bearing balls (type 70000 C) with α=15° can bear unidirectional axial load.

70000C Series

70000B Series

Angular contact bearing balls with α=40° (70000 B type), can accommodate axial loads in one direction only.

70000B Series

7200/7300BEP Series

Single row angular contact ball bearings consist of an outer ring, an inner ring, a row of steel balls and a cage.

7200/7300BEP Series

7400D Series

"D" indicates a duplex ground half pair matched with an identical half pair and is followed by an additional suffix letter to describe the type of duplex.

7400D Series

3200 Series

Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space.

3200 Series

3300 Series

3300 series double row angular contact ball bearings are non-separable and have a ball-loading notch on one side.

3300 Series

5300E Series

Large Angular Contact Ball Bearing - Open, Double Row

5300E Series
< 12345 >